EIFS ADHESIVES & BASECOATS

POLYBASE-WET

Basecoat and Adhesive for Type I EPS Foam Board/ Details

POLYBASE–WET is a polymer–based product designed to be mixed 1 to 1 by weight with Type 10 Portland cement to achieve a mixture that can be used as a basecoat and adhesive for Type I expanded polystyrene (EPS) board and foam shapes. In addition POLYBASE-WET can be used as a basecoat for Polyisocyanurate and mineral wool.

POLYBASE–WET is intended as a basecoat for acrylic stucco finish coats. It can also be used as a skim coat over concrete surfaces in preparation for acrylic stucco finish coat.

  • Outstanding strength and hardness
  • Excellent workability – trowels on easily

  • Increases productivity – through ease of spread
  • Superior adhesive qualities

PACKAGING

60lb (27.2kg) plastic pail, 24 pails per pallet.

COVERAGE

Base coat over mesh
215-230ft² (20.0-21.4m²)

Adhesive
95-115ft² (8.8-10.7m²)* using a ⅝" x ⅝" x 1" (15.9mm x 15.9mm x 25.4mm) U-notched trowel.

*Coverage given is approximate and vary depending on substrate, details and individual application technique.

POLYBASE-DRY

Basecoat and Adhesive for Type I EPS Foam Board/ Details

POLYBASE–DRY is a polymer–modified portland cement based product. It is designed for use as a base coat and adhesive for Type I expanded polystyrene (EPS) board and foam shapes. In addition POLYBASE-DRY can be used as a base coat for polyisocyanurate and mineral wool.

POLYBASE–DRY is intended as a base coat for acrylic stucco finish coats. It can also be used as a skim coat over concrete surfaces in preparation for acrylic stucco finish coat. POLYBASE–DRY is an ideal product for precise detailing or surface leveling.

  • Ready to use, just add water
  • Outstanding strength and hardness
  • Excellent workability – trowels on easily

  • Less waste, mix only the amount required
  • Superior adhesion to all approved substrates
  • Increases productivity – through ease of spread

PACKAGING

50lb (22.7kg) moisture protective bag, 42 bags per pallet.

COVERAGE

Base coat over mesh
110-130ft² (10.2-12.1m²)*

Adhesive
50-60ft² (4.6-5.6m²) using a ⅝" x ⅝" x 1" (15.8mm x 15.8mm x 25.4mm) U-notched trowel.

*Coverage given is approximate and vary depending on substrate, details and individual application technique.